Water Filled Barriers

Water filled barriers are a great safety barrier solution. Our range of water filled barriers are suitable for traffic management, work sites and for crash protection. They help stop, contain and re-direct an impacting vehicle. Easy to install and manoeuvre, our barriers are highly visible, sturdy and durable.


The Shield I safety crash barrier is a unique barrier utilizing a high strength modified UV stabilised polyethylene and patented composite design. Made in Australia and approved by road authorities Australia wide. It is a redirective barrier, easy to install with steel connecting pins. Tested containment MASH test level 1 (2,270kg) at 50km/h and 25 degrees Accepted dynamic deflection 2.2 metres. Status-Accepted and may be used on the classified road network.


Effective Length2,000mmOverall Length2,200mm
Weight Empty81kgWeight Full611kg
Water Fill to Top530 LitresImpact Speed RatingTL-1, 50km/h
Joining SystemSteel PinMinimum Length of Need 44m
MASH Test Level 1YesRoad Authority ApprovedYes

MASH Test Videos

MASH Test – Small Car
MASH Test – Big Car


KI 1000

The KI 1000 Barrier has been designed specifically as a pedestrian and low speed zone barrier. Its simple interlocking system allows barriers to remain connected while moving through angles 120 degrees each way. The barriers are fitted with retro reflective tape and have two apertures topside for fitment of hazard lights, pole signage or extended mesh fencing. The barrier also complies with Australian Standard AS1742-3-1996 Traffic Control Devises for works on roads, Section 3.10.1 (C).


Effective Length2,000mmOverall Length2,200mm
Weight Empty32kgWeight Full387kg
Water Fill to Top355 LitresImpact Speed Ratingn/a kph
Joining SystemInterlocking

Provision for

Amber LightYesMesh FencingYES
Pole SignageYes

Fence Top for Shield I Water Filled Barrier

Fence Top for KI1000 Water Filled Barrier

Frame32mm O.D.Infill Mesh4mm x 4mm
Spacing141mm x 60mm FinishHot Dipped Galvanised

Call 1300 836 733 or leave your message for a quote